• Welcome to ForumKorner!
    Join today and become a part of the community.

Overcoming a wet cell phone

anzui

Member
Reputation
0
The steps that we must
do is as follows:

1. Immediately remove the battery from
the mobile phone.

2. Pat dry with light
the rather warm (lamps), do not use light
the sun, because it will
cause damage to cells
colors on the screen / LCD

3. Pat dry with a time
rather long (1-2 days), so it is necessary in this case
patience, to get
better results.

4. Give special fluids on
charger connector hole on the phone
and the interface connector on the battery. with a liquid alcohol
or perfume or a more
either a liquid spray premises
contact cleanner stainless.
Wait until dry.

5. After the drying process
considered sufficient, try to plug the
and quicken the mobile phone.
If the phone is still in error
on some function or warm / hot, immediately
repeat the process as above.

6. These steps
The above we can use
for mobile phones that are only exposed
raindrops or just plunged into the water or
an instant. When you have entered
or are in enough water
long, measures
we should do is:

7. Usually when that happens, Mobile will experience
restarts, dead alive, or simply
blinking (if it is
occur immediately remove the battery).
The worst is the phone dead
total, or unfunction.

8. Use it as a step
number 1 to 5, when the damage is fixed or not changed,
soon take it to the place
authorized service and warranty, do not forget to tell
how the cause of the condition
damage the phone, so that
its technicians can begin
on the right.
Once the phone can be fixed try to replace the battery with
a new battery.

9. Water currents can cause
short / shorting between the current
negative and positive, and water
left in the machine / hardware phones will experience
a hardening process when
get the current power / power
electricity from the battery, usually water
will deform into
as a white powder that the longer will be colored
green and then brown and then
blackened and this will obviously
caused the surge
on current mobile hardware, to
phones will experience some disruption in several
functions can even be totally dead /
unfunction.

Hopefully troubleshooting steps
Cell phones are beginning to address
exposed above the water can be beneficial to you.
 
Reputation
0
I have heard people put the phone in rice the rice soaks the water and the phone working? Has anyone tried that because it seems like pretty intense but if water damaged the phone already, wouldn't it not work even after putting it into the rice?
 

rob50

Member
Reputation
0
anzui said:
The steps that we must
do is as follows:

1. Immediately remove the battery from
the mobile phone.

2. Pat dry with light
the rather warm (lamps), do not use light
the sun, because it will
cause damage to cells
colors on the screen / LCD

3. Pat dry with a time
rather long (1-2 days), so it is necessary in this case
patience, to get
better results.

4. Give special fluids on
charger connector hole on the phone
and the interface connector on the battery. with a liquid alcohol
or perfume or a more
either a liquid spray premises
contact cleanner stainless.
Wait until dry.

5. After the drying process
considered sufficient, try to plug the
and quicken the mobile phone.
If the phone is still in error
on some function or warm / hot, immediately
repeat the process as above.

6. These steps
The above we can use
for mobile phones that are only exposed
raindrops or just plunged into the water or
an instant. When you have entered
or are in enough water
long, measures
we should do is:

7. Usually when that happens, Mobile will experience
restarts, dead alive, or simply
blinking (if it is
occur immediately remove the battery).
The worst is the phone dead
total, or unfunction.

8. Use it as a step
number 1 to 5, when the damage is fixed or not changed,
soon take it to the place
authorized service and warranty, do not forget to tell
how the cause of the condition
damage the phone, so that
its technicians can begin
on the right.
Once the phone can be fixed try to replace the battery with
a new battery.

9. Water currents can cause
short / shorting between the current
negative and positive, and water
left in the machine / hardware phones will experience
a hardening process when
get the current power / power
electricity from the battery, usually water
will deform into
as a white powder that the longer will be colored
green and then brown and then
blackened and this will obviously
caused the surge
on current mobile hardware, to
phones will experience some disruption in several
functions can even be totally dead /
unfunction.

Hopefully troubleshooting steps
Cell phones are beginning to address
exposed above the water can be beneficial to you.

nice tips for overcoming wet cellphone. I am following ur guide now overcoming this problem.
 
Top