Hello there!
Today I will show you how to set-up your Dynamic signature.
Step 1:
Set all your settings on the GUI.
Click the Signature Info Tab.
Step 2:
Type in a Username and password (Don't you your RS account or RSBots forum password.)
username and password cannot have any spaces
Click Save Info twice. (Twice just to make sure it's saved)
password and username will be encrypted but DO NOT use the same password as you do for other stuff.
bot will autocomplete this field after you save it.
Step 3:
Start the bot.
After around 10-30 minutes the Signature will update.
Step 4:
Click 'THIS' and scroll down. (Please note, the image is from RSBots.net forum,
I have this guide over there in the RC section, so I am aware the signature page does not look the same, but the box and information that is in-putted is the same.
Type in [img ]www.sladers.com/signature.php?u=USERNAMEHERE[ /img] -- Please, change 'USERNAMEHERE' to the User-name you supplied in the RC GUI, and remove the gaps between [img ] and [ /img]
Finally, click 'Update Signature' and you're done.
Check one of your posts, and you should see your new, Dynamic Signature.
If you need any help, feel free to ask.
Thanks very much!
Jonathan
Today I will show you how to set-up your Dynamic signature.
Step 1:
Set all your settings on the GUI.
Click the Signature Info Tab.
Step 2:
Type in a Username and password (Don't you your RS account or RSBots forum password.)
username and password cannot have any spaces
Click Save Info twice. (Twice just to make sure it's saved)
password and username will be encrypted but DO NOT use the same password as you do for other stuff.
bot will autocomplete this field after you save it.
Step 3:
Start the bot.
After around 10-30 minutes the Signature will update.
Step 4:
Click 'THIS' and scroll down. (Please note, the image is from RSBots.net forum,
I have this guide over there in the RC section, so I am aware the signature page does not look the same, but the box and information that is in-putted is the same.
Type in [img ]www.sladers.com/signature.php?u=USERNAMEHERE[ /img] -- Please, change 'USERNAMEHERE' to the User-name you supplied in the RC GUI, and remove the gaps between [img ] and [ /img]
Finally, click 'Update Signature' and you're done.
Check one of your posts, and you should see your new, Dynamic Signature.
If you need any help, feel free to ask.
Thanks very much!
Jonathan